基于Word2Vec模型特征扩展的Web搜索结果聚类性能的改进

对于用户泛化和模糊的查询，将Web搜索引擎返回的列表内容聚类处理，便于用户有效查找感兴趣的内容。由于返回的列表由称为片段（snippet）的短文本组成，而传统的单词频率-逆文档频率（TF-IDF）特征选择模型不能适用于稀疏的短文本，使得聚类性能下降。一个有效的方法就是通过一个外部的知识库对短文本进行扩展。受到基于神经网络词表示方法的启发，提出了通过词嵌入技术的Word2Vec模型对短文本扩展，即采用Word2Vec模型的TopN个最相似的单词用于对片段（snippet）的扩展，扩展文档使得TF-IDF模型特征选择得到聚类性能的提高。同时考虑到通用性单词造成的噪声引入，对扩展文档的TF-IDF矩阵进行了词频权重修正。实验在两个公开数据集ODP239和SearchSnippets上完成，将所提方法和纯snippet无扩展的方法、基于Wordnet的特征扩展方法和基于Wikipedia的特征扩展方法进行了对比。实验结果表明，所提方法在聚类性能方面优于对比方法。     

基于k-shell的复杂网络最短路径近似算法

复杂网络最短路径经典算法的处理效率较低，不适用于大规模复杂网络，而现有近似算法通用性有限，且计算准确率不理想，不能满足规模日益扩大的复杂网络中的最短路径计算需求。针对于此，提出基于[k]-shell的复杂网络最短路径近似算法。算法利用节点的[k]-shell值进行网络划分并引导搜索路径，利用超点聚合处理[k]-shell子网来降低路径搜索中节点和连边的规模，通过在路径搜索过程使用双向搜索树方法提高算法的计算效率和准确率。实验结果表明，算法通用性较好，在现实与仿真大规模复杂网络中均具有较高的计算效率和准确率。     

An improved cuckoo search algorithm for the problem of electric distribution network reconfiguration

Power loss reduction has an important role in operating electric distribution network system. There are a lot of methods for reduction power loss such as capacitor placement, distributed generation placement and electric distribution network reconfiguration (EDNR). Among these methods, the EDNR is an efficient technique to reduce power loss due to without taking any costs. However, the EDNR problem is a nonlinear, discrete problem and lots of extreme points. Therefore, it is necessary to have efficient methods for solving the EDNR problem. In this paper, an improved cuckoo search algorithm (ICSA) is proposed for solving the EDNR problem. In which, based on disadvantages of exploration and exploitation process of cuckoo search algorithm (CSA) for solving the EDNR problem, a local search mechanism is added to exploit candidate solutions existing around the current best solution. The calculated results on the simple distribution networks to complex distribution networks show that ICSA has ability for finding the global optimal solution with much smaller iterations and better quality of obtained solution compared with CSA and some other improved versions of CSA. The performance comparisons with other existing methods available in previous studies and the software of Power System Simulator/Advanced Distribution Engineering Productivity Tool (PSS/ADEPT) also lead to the better electric distribution network configuration with smaller total power losses. As a result, ICSA is a potential and reliable method for solving the EDNR problems.     

基于平面不封闭图形切割的路径规划

在平面切割环节中，如何确定更短切割路径以减少加工成本、降低设备损耗和提升切割质量是工业应用和学术研究的重点。目前国内外对平面切割路径的研究主要集中于封闭图形，为此，针对在激光刀模行业中不封闭图形的问题，提出一种基于禁忌搜索的贪婪算法和贪婪准则的局部优化。首先使用构建型的贪婪算法和改进型的禁忌搜索算法相结合的方式对加工过程中的图元路径进行优化排序，随后提出贪婪准则的局部优化系数，削弱贪婪算法的“贪心”思想，解决加工路径的规划和优化问题。实验数据表明，禁忌搜索的贪婪算法和局部优化在对切割路径的规划和空行程优化上有显著效果，空行程减少50%以上，并且其优化性能和图元数量成正比，能有效地解决刀模行业以及其他激光雕刻行业中图形不封闭的切割难题。     

Scheduling distributed flowshops with flexible assembly and set-up time to minimise makespan

The scheduling problems under distributed production or flexible assembly settings have achieved increasing attention in recent years. This paper considers scheduling the integration of these two environments and proposes an original distributed flowshop scheduling problem with flexible assembly and set-up time. Distributed production stage is deployed several homogeneous flowshop factories that process the jobs to be assembled into final products in the flexible assembly stage. The objective is to find a schedule, including a production subschedule for jobs and an assembly subschedule for products, to minimise the makespan. Such a scheduling problem involves four successive decisions: assigning jobs to production factories, sequencing jobs at every factory, designating an assembly machine for each product and sequencing products on each assembly machine. The computational model is first established, and then a constructive heuristic (TPHS) and two hybrid metaheuristics (HVNS and HPSO) are proposed. Numerical experiments have been carried out and results validate the algorithmic feasibility and effectiveness. TPHS can obtain reasonable solutions in a shorter time, while metaheuristics can report better solutions using more yet acceptable time. HPSO is statistically comparable yet less robust compared with HVNS for small-scale instances. For the large-scale case, HPSO outperforms HVNS on both effectiveness and robustness.     

膨胀剂对约束条件下UHPC早期抗裂性能影响的试验研究

超高性能混凝土(UHPC)在钢桥面铺装结构中由于铺装材料受到钢板、栓钉等的约束,加上材料本身水胶比小,更易收缩,早期容易承受拉应力导致开裂。通过在拌和过程中添加膨胀剂可以起到减小收缩的作用,但该方法对于约束条件下的UHPC铺装的早期抗裂性能提升是否有促进作用,仍需通过更多试验进行合理评估和深入研究。通过圆环法对3组不同配方的UHPC在均匀约束条件下的早期抗裂性能进行定量测试,并将试验数据进行回归分析和计算,得到了各组的平均应力发展速率,进而评估了各组的开裂风险等级。试验结果表明,通过在UHPC中加入适量膨胀剂,可使其最终收缩应力减小,并可降低其收缩应力发展速率,进一步降低其在约束条件下的开裂风险。     

Performance enhancement of energy extraction capability for fuel cell implementations with improved Cuckoo search algorithm

This paper addresses an improved optimization method to enhance the energy extraction capability of fuel cell implementations. In this study, the proposed method called Dynamic Cuckoo Search Algorithm (DCSA) is tested in a stand-alone fuel cell in order to control the system power under dynamic temperature response. In the operational process, a fuel cell is connected to a load through a dc-dc boost converter, and DCSA is utilized to adjust the switching duration in dc-dc converter by using voltage, current and temperature parameters. In this way, it controls the output voltage to maximize power delivery capability at the demand-side and eliminates the drawback of conventional cuckoo search algorithm (CSA) which cannot change duty cycle under operating temperature variations. In this regard, DCSA shows a significant improvement in terms of system response and achieves a more efficient power extraction than the conventional CSA method. In order to demonstrate the system performance, the stand-alone fuel cell system is constructed in Simulink environment via a processor-in the-loop (PIL) based digital implementation and analyzed by using different optimization methods. In the analysis section, the results of the proposed method are compared with conventional methods (perturb&observe mppt, incremental conductance mppt, and particle swarm optimization). In this context, convergence speed and efficiency analysis for both methods verify that the DCSA gives original results compared to conventional methods.     

早冠丝瓜406新品种的选育

早冠丝瓜406是以S4为母本、X06为父本配制而成的一代杂种.极早熟,植株主蔓分枝性强,生长性强盛;雌花节位低,首朵雌花着生于主蔓第5节~7节,采收期为播种后58 d^60 d开始;嫩瓜呈长棒形,果端较圆,果皮深绿色,单果重0.5 kg^0.9 kg,果实纵径42 cm^50 cm,横径3.7 cm^4.2 cm,前期产量为16772.0 kg/hm^2,总产量可达47447.5 kg/hm^2.适合长江流域、云贵高原及湖南地区早春设施和露地栽培.     

基于ASOS-ELM的湿式球磨机负荷软测量方法

针对湿式球磨机在磨矿过程中内部负荷靠专家经验难以准确预测的问题,提出一种基于改进的共生生物搜索(ameliorated symbiotic organisms search,简称ASOS)-极限学习机(extreme learning machine,简称ELM)的磨机负荷软测量方法。首先,利用ELM算法建立磨机负荷软测量模型,运用ASOS算法优化软测量模型的隐含层参数;其次,以筒体振动与振声信号的特征信息构建磨机负荷特征向量,并将其作为软测量模型的输入,将磨机负荷参数作为输出;最后,通过磨矿负荷检测实验和对比分析表明,磨机负荷软测量模型的负荷参数预测准确率较高,泛化能力较强,为磨机磨矿效率的提高及控制优化提供了有益的指导。     

Visible light-activated degradation of microcystin-LR by ultrathin g-C3N4 nanosheets-based heterojunction photocatalyst

Microcystins (MCs) is a harmful toxin generated by blue-green algae in water, which has seriously threatened the ecological safety of water and human body. It is urgent to develop new catalysts and techniques for the degradation of MCs. A feasible electrostatic self-assembly method was carried out to synthesize BiVO₄/g-C₃N₄ heterojunction photocatalyst with highly efficient photocatalytic ability, where BiVO₄ nanoplates with exposed {010} facets anchored to the g-C₃N₄ ultrathin nanosheets. The morphology and microstructure of the heterojunction photocatalysts were identified by XRD, SEM, TEM, XPS, and BET. The g-C₃N₄ nanosheets have huge surface area over 200 m²/g and abundant mesoporous ranging from 2-20 nm, which provides tremendous contact area for BiVO₄ nanoplates. Meanwhile, the introduction of BiVO₄ led to red-shift of the absorption spectrum of photocatalyst, which was characterized by UV-vis diffuse reflection spectroscopy (DRS). Compared with pure BiVO₄ and g-C₃N₄, the BiVO₄/g-C₃N₄ heterojunction shows a drastically enhanced photocatalytic activity in degradation of microcystin-LR (MC-LR) in water. The MC-LR could be removed within 15 minutes under the optimal ratio of BiVO₄/g-C₃N₄. The outstanding performance of the photocatalyst is attributed to synergetic effect of interface Z-scheme heterojunction and high active facets {010} of BiVO₄ nanoplates, which provides an efficient transfer pathway to separate photoinduced carriers meanwhile endows the photocatalysts with strong redox ability.